Product ID:R74-3001-201, APPLE COLOR LASER WRITER SETUP(SUPDAT)
MSDS Date:12/22/1994
FSC:6850
NIIN:00N070813
MSDS Number: CBMQD

CANON INC

30-2, SHIMOMARUKO 3-CHOME, OHTA-KU
TOKYO, JAPAN

Emergency Phone: 03-3758-2111

Info Phone: 03-3758-2111

Cage: EO274

CANON INC

TOKYO JA

Telephone: 03-3758-2111/ 516-328-5600(USA)

Cage: EO274

POLYESTER RESIN

Fraction By Weight: 85-95%

OSHA PEL N/K

ACGIH TLV: N/K

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 3-7%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

LD50 LC50 Mixture:LD50(ORAL,RAT):>5,000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION:NOT APPLICABLE ROUTE OF
ENTRY FOR INTENDED USE. INHALATION:MINIMAL RESPIRATORY TRACT
IRRITATION MAY OCCUR AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY
NON-TOXIC DUST. EYE CONTACT:MAY CAUSE IRRIT ATION. SKIN
CONTACT:UNLIKELY TO CAUSE SKIN IRRITATION. CHRONIC TOXICITY:NO DATA
AVAILABLE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGESTION:DILUTE STOMACH CONTENTS WITH SEVERAL GLASSES OF
WATER. INHALATION:REMOVE VICTIM TO FRESH AIR. EYE CONTACT:FLUSH
WITH RUNNING WATER FOR AT LEAST 15 MINUTES. SKIN CONTACT:WASH WITH
SOAP AND WA TER.

Extinguishing Media:CO*2, WATER, DRY CHEMICALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TONER MATERIAL, LIKE MOST ORGANIC
MATERIAL IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATION
OR HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF THE DUST.
SWEEP MATERIAL ONTO PAPER AND CAREFULLY TRANSFER TO A SEALABLE
WASTE CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
AWAY FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:AN ASSEMBLY FOR LASER BEAM PRINTER, COMPOSED OF TONER
POWDER AND A DEVELOPER UNIT. THE TONER POWDER CANNOT BE REMOVED,
UNTIL THE CARTRIDGE IS FORCED TO BE BROKEN.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NOT REQUIRED UNDER INTENDED USE.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT UNDER
INTENDED USE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR TRADE/PART #:KIT (TONER CARTRIDGE BLACK).

Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Spec Gravity:1.0-1.4(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK FINE POWDER, SLIGHT PLASTIC ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMBUSTION WILL PRODUCE CARBON DIOXIDE
AND, POSSIBLY TOXIC CHEMICALS SUCH AS CARBON MONOXIDE.

Waste Disposal Methods:THIS PRODUCT IS CONSTRUCTED FROM PLASTICS AND
METALS. THE WASTE TONER COULD BE CONSIDERED AS PLASTIC WASTE.
DISPOSAL SHOULD BE SUBJECTED TO FEDERAL, STATE OR LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.